2Xg8Ge Wsic Interface Card - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
Item
Maximum power
consumption
Typical heat
consumption
Maximum heat
consumption
Available slot

2.4.2 2XG8GE WSIC Interface Card

This interface card provides eight gigabit RJ45 ports and two 10-gigabit SFP+ ports for
packet exchange and device management, but does not support hot swap.
Panel
Figure 2-98
Figure 2-98 2XG8GE card panel
2XG8GE
Name
Ports
0 to 7 (RJ45)
Port 0 (SFP+)
Port 1 (SFP+)
Indicators
LINK indicator (green)
ACT indicator (yellow)
Issue 08 (2017-06-30)
Description
12.8 W
38.6 BTU/hour
43.7 BTU/hour
WSIC or lower part of the XSIC slot
illustrates the appearance of the 2XG8GE card panel.
ACT LINK
0 1 2
Description
Eight 10/100/1000M autosensing Ethernet electrical ports.
10-gigabit SFP+ port: The port number is 8, and the port
connects to the
10-gigabit SFP+ port: The port number is 9, and the port
connects to the
l Steady on: The link is connected.
l Off: The link is disconnected.
l Blink: Data is being sent or received.
l Off: No data is being sent or received.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 4 5
10GE Optical
10GE Optical
2 Hardware Overview
0 1
6 7
10G
Transceiver.
Transceiver.
1
0
222