Maintenance - NEC Electra Elite IPK II General Description Manual

Electra Elite IPK II
User Programmable Features
Multiline Terminal users can also program the following features from their station:
J
J
J
Multiline Terminals without programmable One-Touch keys and Single Line
Telephones can be used to program Station Speed Dial memories. Attendant
Positions can be used to program System Speed Dial memories and the System
Clock/Calendar.
M
S 3
AINTENANCE
ECTION
Installing Interface ETUs without Disrupting Ongoing Calls
Each interface and optional ETU has an ON/OFF switch with an LED indication of
power status. An interface ETU with this switch OFF can be removed or installed with
the system power on.
The combination of status indication and ETU replacement with power on allows the
maintenance technician to replace suspect circuits without disrupting ongoing calls.
Up/Down Load of Data
Using System Program Technician/End-User Software, Station Speed Dial data,
System Speed Dial data, and all System Data can be transferred from/to a PC. The
Up/Down Load may be accomplished from a local or remote location.
General Description Manual
Ringing Line Preference
Feature Access and/or One-Touch keys (e.g., Speed Dial or Direct Station
Selection.)
Speed Dial
Document Revision 1
4 - 3