NEC Electra Elite IPK II General Description Manual page 65

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Electra Elite IPK II
Using the Daylight Savings Setup program, you can determine whether the system
should automatically adjust the system time for daylight savings time/standard time
changes.
Clock Adjustment
The system can be programmed to automatically adjust the system clock on a nightly
basis. This feature allows you to make adjustments should the system cabinet
regularly lose or gain time.
C O M e s s a g e W a i t i n g I n d i c a t i o n
This feature provides a Message Waiting indication when Voice Mail from the Central
Office is used. The CO provides this feature using Visual Message Waiting Indication
(VMWI) standards. Visual Message Waiting Indication visually indicates to a user that
a message is present in their voice mail box. When VMWI is provided, the Electra
Elite IPK II provides a flashing LED on a line key assigned with the trunk appearance.
The VMWI standard supported by the Electra Elite IPK IIincludes:
J
J
C o d e R e s t r i c t i o n
Code Restriction limits the numbers an extension user may dial. By allowing
extensions to place only certain types of calls, you can better control long distance
costs. The system applies Code Restriction according to an extension's Code
Restriction Class. The system allows for up to 15 Code Restriction Classes and 416
extensions
C o d e R e s t r i c t i o n - D i a l B l o c k
Code Restriction-Dial Block lets a user temporarily block an extension's Code
Restriction. This helps a user block his or her phone from being used by another
person while they are away from their desk. A user would need to enter a 4-digit
personal code to enable/disable this feature.
Dial Block can also be set by the supervisor's access code. If Dial Block has already
been set by an extension user, the supervisor can not release it. Additionally, if Dial
Block has been set by the supervisor code, the extension user can not release it.
Important: This function works by password and Class of Service control (the
supervisor is not an assigned extension). If Dial Block is available for all Classes of
Service, everyone may become a supervisor if they know the Dial Block password.
General Description Manual
Type 1 Caller ID, FSK without power ringing using the MDMF protocol
Type 1 Caller ID, FSK without power ringing using the SDMF protocol
.
Document Revision 1
2 - 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents