Operation Panel Messages - Ricoh BRG-P1 Field Service Manual

3. Appendix: Troubleshooting Guide
Error Type
Breakdown or
failure error (SC)
Print/Data Errors
Diagnostic Error
Temperature Range Errors
At power on
Printing...
• Once the machine falls below or exceeds the usable temperature range, quality printing can no
longer be assured so an error message will alert the operator that printing will stop until normal
temperature has been restored.
• If such an error occurs, the machine should be moved to a location where ambient temperature is
10 to 32°C (50 to 89.6F).

Operation Panel Messages

1. Normal Status
96
Description
An abnormal condition exists indicating
a breakdown that prevents the machine
from printing. After the cause of the
problem has been removed, the
machine must be cycled off/on to
restore normal operation. The machine
basically requires servicing (the
problem cannot be solved by the
operator).
The designated print operation cannot
function, or there is a print data error.
The machine fails to operate due to a
problem with the CTL board or a
controller option.
At power on, the printer is ready to
print and Ready status is maintained
Operation has been interrupted to wait
for the machine to resume the Ready
status.
Main Error
See the "Error Code" table.
• Memory overrun
• Work memory overrun
• Data flow interruption
• Parallel interface error
• Memory error
• Flash memory error
Once the machine has entered the
usable temperature range that
guarantees optimum operation, the
machine automatically enters the
Ready status.
Maintains machine Ready status. The
machine needs to be cycled off/on.