Ricoh BRG-P1 Field Service Manual page 209

No. Message
Remove Misfeed Open Top
38 Cover/Press Form Feed,
remove misfeed
Paper Misfeed Bypass Tray/
Reset Paper
39
(J028/J029/J035)
Paper Misfeed Tray 2/ Reset
Paper
--or--
40
Paper Misfeed Tray 3/ Reset
Paper
(J028/J029/J035)
Paper Misfeed Tray 1/ Reset
41
Paper
Remove Misfeed Open Top
42 Cover / Press Form Feed,
remove misfeed
Paper Misfeed Remove Duplex
or/ Tray2 Rear Cover remove
43
misfeed
(J028/J029/J035)
Remove Misfeed Duplex Unit/
44 Remove Misfeed from Duplex
Unit
Reset Duplex Unit correctly
45
(J028/J029/J035)
Paper Misfeed Remove all
Rear/Covers then remove
46
misfeed
(J028/J029/J035)
Paper scraps remain in the machine, or a jammed sheet has
not been removed. Press [Form Feed] to eject the sheet, and
then, remove the paper from the area below the top cover.
Paper has jammed in or failed to feed from the multi bypass
tray. Remove the paper from multi bypass tray.
Paper has jammed in or failed to feed from Tray 2, or 3.
Remove the paper from Tray 2, or 3.
Paper has jammed in or failed to feed from Tray 1. Remove
the paper from Tray 1.
Paper has jammed in or failed to feed from in the area
below the top cover. Remove the paper from the area below
the top cover.
Paper has jammed in or failed to feed from the duplex unit or
feed unit of Tray 2. Remove the paper.
Paper has jammed in or failed to feed from the duplex unit.
Remove the paper from the duplex unit.
The duplex unit is not mounted correctly and/or the duplex
unit cover is open. Mount the duplex unit correctly and close
the duplex unit cover.
The fed paper has failed to reach the Tray 2 relay sensor.
Remove the paper.
Troubleshooting Guide
Action
207