Installation; Preparation; Environment; Choosing A Location - Ricoh BRG-P1 Field Service Manual

2. Installation

Preparation

Environment

• White area: Permissible Range
• Blue area: Recommended Range
Set up the machine in a location that meets these minimum requirements:
Temperature Range:
Humidity Range:
Ambient Illumination:

Choosing a Location

1. Always install the machine:
• On a sturdy, level surface.
• Where it will not become damp.
2. Make sure the machine is never exposed to:
• Extreme changes from low to high temperature or high to low temperature.
• Cold or cool air directly from an air conditioner.
• Heat from a space heater.
3. Never install the machine in areas near:
o o
10 C to 32 C (50F to 89.6F)
15% to 80% RH
Less than 2,000 Lux (never expose to direct sunlight).
25