Margin For Detecting If The Print Cartridge Has Run Out Of Ink; Set Threshold For Near-Full Alert - Ricoh BRG-P1 Field Service Manual

2. Appendix: SP Mode Tables

Margin for Detecting if the Print Cartridge Has Run out of Ink

3-006-001
3-006-002
3-006-003
3-006-004

Set Threshold for Near-Full Alert

3-007-001
3-007-002
3-007-003
3-007-004
3-007-005
3-007-006
50
C:ENDMARGINE:K
C:ENDMARGINE:C
C:ENDMARGINE:M
C:ENDMARGINE:Y
DNA This Series (J027/J028/J029)
TH:WASTE:R
Use this SP to set the threshold value to trigger the near-full alert for the right ink
collector unit sensor.
[0 to 4294967295/0/1/nl]
TH:WASTE:R:FULL
Use this SP to set the threshold value of the firmware counter to trigger the full alert
for the right ink collector unit sensor.
[0 to 4294967295/0/1/nl]
TH:WASTE:L
Use this SP to set the threshold value to trigger the near-full alert for the left ink
collector unit sensor.
[0 to 4294967295/0/1/nl]
TH:WASTE:L:FULL
Use this SP to set the threshold value of the firmware counter to trigger the full alert
for the left ink collector unit sensor.
[0 to 4294967295/0/1/nl]
TH:WASTE:RF
Use this SP to set the threshold value to trigger the near-full alert for the right ink
sump.
TH:WASTE:RF:FULL
K (Black)
C (Cyan)
M (Magenta)
Y (Yellow)
Software Count : Ink Collector Unit Near Full
Software Count: Ink Collector Unit Full Alert
Software Count : Ink Collector Unit Near Full
Software Count: Ink Collector Unit Full Alert
Right Ink Sump Near-Full Threshold
Right Ink Sump Threshold