Ricoh BRG-P1 Field Service Manual page 233

• Replace registration sensor 1.
Action 2
• Replace trailing edge sensor 2.
Jam 10
Registration Late Jam: Tray 2 (PFU)
(J028/J29/
J035)
Paper Misfeeed
Message
Press the Form Feed button.
• Paper feed rollers slipped, could not feed paper
Cause
• Paper caught, warped in paper feed path.
After the paper fed from the tray, or when the paper was inverted for duplexing,
Details after the trailing edge sensor went ON, the registration sensor failed to detect
within the prescribed time.
Action 1 • Press [Form Feed] key on operation panel.
• Replace inverter guide.
Action 2 • Replace TE sensor.
• Replace CTL board.
Jam 11 Registration Late Jam: Duplex Unit
Paper Misfeeed
Message
Press the Form Feed button.
• Paper feed rollers slipped, could not feed paper
Cause
• Paper caught, warped in paper feed path.
After the paper fed from the tray, or when the paper was inverted for duplexing, after
Details the trailing edge sensor went ON, the registration sensor failed to detect within the
prescribed time.
Action 1 • Press [Form Feed] key on operation panel.
• Replace inverter guide.
Action 2 • Replace trailing edge sensor.
• Replace CTL board.
Error Codes
231