Ricoh BRG-P1 Field Service Manual page 293

Bit SW 7. Not Used
Bit SW 8: GW Bit Switch
Bit Function
0 Not Used
Design Waveform
Switching
1
2 Speed Mode Priority
Operation Control
3
Mode After Printer Idle
4 Maintenance Mode
Recycled Paper Menu
Display
5
Charge Setting for
Recycled Paper
6
Auto Cleaning for
High Volume User
7
Default
---
0 DFU
Designates waveform switch
0: For product
1: For design
0
0
0
0 This switch sets whether the recycled paper charge
menu of the operational panel.
0: Not displayed
1: Displayed
0 This switch sets whether the charge bias is selected
for normal paper or recycled paper.
0: Recycled paper charge
1: Normal paper charge
0 1: Cycling the printer off/on cancels error 976,
977 and restores operation of the printer when air
is frequently detected in the print heads.
0: No message is issued for frequent air detection.
Set to "0" only as a temporary setting. Be sure to
reset to "1" to restore normal air detection.
Service Mode, Engine Maintenance
Details
---
37