Preventive Maintenance; Pm Table; Service Call Procedures - Ricoh BRG-P1 Field Service Manual

3. Preventive Maintenance

PM Table

There are no PM Parts in this machine.

Service Call Procedures

The procedures listed below should be done by the service technician. For more details about how to do
these procedures, please refer to "Cleaning Procedures".
Description
External Covers
Connecting Rollers,
Paper Feed Roller
Friction Pad
Maintenance Unit
Printer Operation, Print
Quality
Transport Belt
Horizontal Encoder
Strip
Vertical Encoder Wheel Clean linen cloth, dampened with alcohol. Do not use cotton, tissue paper,
At Service Call, or As Required
Damp cloth.
Damp cloth. Rotate the roller freely as you clean it.
Damp cloth. This is the cork friction pad on the front edge of the standard
paper cassette.
Damp cloth. Always use a tightly wrapped damp cloth to remove the ink
that has hardened around the suction cap and wiper blade when you
replace the ink collector unit.
Print a Nozzle Check Pattern and check the results. Clean the print heads if
necessary. For more, see "Print Head Cleaning and Adjustment" in section
"4. Replacement and Adjustment".
Slightly damp cloth. Then dry cloth.
Important: To protect the surface of the transport belt, never use alcohol or
any other type of organic solvent.
Clean linen cloth, dampened with alcohol. Do not use cotton, tissue paper,
any material that could shred and leave fibers.
any material that could shred and leave fibers.
43