Table of Contents
Advertisement
Error & Status Messages on the Operation Panel
Message
ADD FUSER OIL
CALL SERVICE
SC:nn
CHECK CHARGER
CHECK FUSING
UNIT
CHECK PCU
CHECK TONER
CARTRIDGE
CHECK WASTE
TONER BOTTLE
CHECK (tray name)
CLOSE
FRONT COVER
CLOSE
LEFT COVER
CLOSE PAPER EXIT
COVER
4. Troubleshooting
Description
The fuser oil bottle is empty. Replace the fuser oil bottle.
There is a malfunction in the
printer.
The charger is not set cor-
rectly or the charger cleaner
is not in the correct position.
The fusing unit is not in-
stalled in the printer.
The photoconductor unit is
not installed in the printer.
The toner cartridge is not in-
stalled correctly.
The waste toner bottle is not
installed.
The paper tray is not in-
stalled correctly.
The tray on the paper feed-
ing path was not set correct-
ly when the printer received
the print job.
The front cover is open.
The left cover is open.
The paper exit cover is open. Close the paper exit cover.
Comments
P.50 "Replacing the Fuser
Oil Bottle and Ozone Filter"
Turn the printer off and on.
If this doesn't clear the prob-
lem, contact your sales or
service representative.
Set the charger correctly.
P.53 "Replacing the Waste
Toner Bottle and Charger"
Contact your sales or service
representative.
Install the photoconductor
unit.
P.48 "Replacing the
Photoconductor Unit"
Install the cartridge correct-
ly.
P.45 "Replacing the
Toner Cartridge"
Install the waste toner bot-
tle.
P.53 "Replacing the
Waste Toner Bottle and Charg-
er"
Install the paper tray cor-
rectly.
Install the paper tray cor-
rectly. The printer will re-
start printing automatically.
Close the front cover.
(
P.1)
Close the left cover. (
(
P.3)
P.1)
29
Advertisement
Table of Contents
