Ctl Board Replacement - Ricoh BRG-P1 Field Service Manual

4. Replacement and Adjustment
• Wait for the report to print (it does not start immediately).
• Printing requires about 2 min.
8. Exit the Service Menu, and switch the machine off.
• For more details about these reports, please refer to Section "5. System Maintenance
Reference".

CTL Board Replacement

Preparation:
• Duplex unit (J028/J029/J035) (
• All covers (
• All Ink cartridges
1. The CTL Board cover (
• Slide the cover, and then remove it. Make sure that the carriage is in the home position.
Otherwise, the cover is blocked by the carriage.
82
page 48)
page 50)
x 3, x 2, x 1).