Ricoh BRG-P1 Field Service Manual page 214

6. Troubleshooting
SC Pattern
20231 D
SC Pattern
1
20232* D
SC Pattern
1
20233* D
SC Pattern
1
20234* D
SC Pattern
20241 D
212
Error Name / Detection Criteria / Major Cause / Solution
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 1 error)
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 2 error)
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 3 error)
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 4 error)
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 1 error)
Turn the main power switch off and then back on.