Ricoh BRG-P1 Field Service Manual page 205

No. Message
Loading Ink... / WAIT! N
01
minutes
02 Processing...
03 Ready
04 Waiting...
05 Resetting Job...
06 Setting Change...
Panel Locked
07
Cannot use
08 Maintenance in Process...
09 Page Drying...
Cleaning Feed Belt...Wait
10
2min
11 Shutting down...
2. Diagnostic Errors
No. Message
Hardware Problem: Ethernet
12
Board
3. Warning Errors
No. Message
13 Low Ink
Ink being filled.
"N" indicates time required for this operation.
Do not touch any keys during the operation.
Print job is in progress.
Machine is ready to print.
Printer is warming up or waiting for print job data.
A print job is being reset. Wait a few moments.
Print settings are being updated. Wait a few moments.
You have pressed a locked key on the operation panel, so
release the lock.
Print head cleaning or flushing is in progress. Wait for print
head maintenance to finish.
Being dried.
Charge leakage is being removed.
This appears while the machine shuts down.
Ethernet error occurred. Disconnect all connected cables,
and then cycle the machine off/on. If this message is
displayed again, call for service.
Ink cartridge is almost empty. Note the color of the ink
cartridge where ink supply is low, and then procure and
new cartridge of the same color.
Troubleshooting Guide
Action
Action
Action
203