Horizontal Encoder Strip - Ricoh BRG-P1 Field Service Manual

Reinstallation
• When reinstalling the vertical encoder wheel [A], turn the wheel slowly while pressing in slightly
until it snaps into the correct position.
• After attaching the timing belt, move the belt by hand to check that the wheel rotates smoothly.

Horizontal Encoder Strip

Preparation
• Duplex unit (J028/J029/J035) (
• Rear cover ( page 51 "Rear Cover, Top Cover").
• Left cover ( page 55).
• Right cover ( page 53).
• Unlock the carriage (
1. Push the carriage unit [A] to the center.
page 48).
page 62)
Encoders
71