Error & Status Messages on the Operation
Panel
Messages
Ready
Offline
Please wait
Network Board Firm-
ware downloading....
Empty Hole Punch re-
ceptacle.
Memory Error. Only 1
set can be output.
Add Staples.
Network Board initializ-
ing...
Going Offline.
The Job has been reset.
7. Troubleshooting
Description
The printer is Online and
ready to make a print.
The printer is Offline.
The printer is warming up
or processing internally.
The New network board
firmware is being down-
loaded.
The Punch Trash got full
during the current punching
job.
An Engine HDD error oc-
curred during the current
collate operation.
The staples are running out
during the current stapling
job.
The NIB 450-E firmware is
being initialized.
The machine is shifting from
Online to Offline.
The current job has been re-
set.
Comments
If you want to change into
Offline mode, touch the [Of-
fline] key.
If you want to change into
Online, touch the [Online].
Wait for the machine to get
ready.
Wait until it is downloaded.
Punching cannot be made
though the print job contin-
ues. Dump the punch trash.
This message remains until
the next print job begins.
The print job can be complet-
ed with only one output
copy of the document.
This message remains until
the next print job begins.
The stapling is being contin-
ued, even if this message ap-
pears.
This message remains until
the next print job which does
not require stapling begins.
Wait until it is initialized.
Wait until it shifts to Offline.
53