Ricoh BRG-P1 Field Service Manual page 180

5. System Maintenance Reference
PRINT SMC
EXEC
6. [#Enter].
OK?
7. [#Enter].
• Wait for the report to print (it does not start immediately).
• Printing requires about 2 min.
8. Exit the Service Menu, and switch the machine off.
9. [Power] to switch the machine on.
Here is a brief summary of what is listed in the Engine Summary Chart.
MODEL
SER_NO
DUMMY_NO
Firm Ver
SENSOR 1
SENSOR 2
SENSOR 3
SP No, Name, Value
Sensor 1: Input Sensors (1 of 2)
The status of these sensors are also displayed by SP5-804-004.
No. Meaning
0 Top Cover Switch
1 Not Used
2 Duplex Unit Set Sensor
3 Multi Bypass Set Sensor
178
Heading
Number of the Printer Model
Printer Serial Number
Version number of the firmware in the printer
See details below.
SP number, name, value of current setting
Meaning
No. Meaning
8 Paper Feed Unit (Tray 2) Relay Sensor
9 Paper End Sensor (Tray 1)
10 Paper End Sensor (Tray 2)
11 Paper End Sensor (Tray 3)