Avaya Scopia XT Series User Manual page 12

Scroll through menus and options using the arrow keys and pressing the ok/menu key to select an item.
Enter letters and digits into a field using the remote's keypad on the XT Remote Control Unit. The
system displays the current entry method to the right of the field
right of an input field
repeatedly while the cursor is in the input field, to switch between abc1 (default) for lower case
alphanumeric characters, ABC for upper case characters only (no digits), abc for just lower case
characters only (no digits), and 123 for digits only. To enter a letter or number, press a key repeatedly to
cycle through its characters.
During a videoconference, you can send DTMF tones via the keypad. DTMF is often used to
communicate with an MCU or other device which accepts DTMF commands. For example, to display the
MCU menu in a call hosted on a Scopia
Guide for Scopia
Some additional shortcuts from the XT Remote Control Unit include:
• Press and hold a number key to recall a camera preset (0-9).
• Press and hold the Dial
• Press and hold the near/far key to switch between local and remote shared content.
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 5: The XT Remote Control Unit
on page 12). You can switch entry methods by pressing the 1/a/A button
Figure 6: Entry method displayed to the right of an input field
®
Elite MCU, press * at any time. For more information, see User
®
Elite MCU.
key to toggle Do Not Disturb (DND).
(Figure 6: Entry method displayed to the
Getting Started | 12