Resolving XT Remote Control Unit Problems
Problem
Solution
Solution
Solution
Restoring Default User Settings
About this task
This procedure explains how to restore the default settings if necessary. You can do this from the
endpoint itself only.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Deployment Guide for Avaya Scopia
Procedure
1. From the endpoint's main menu, select Configure > Advanced > Utilities > Restore
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
The XT Remote Control Unit does not function.
Replace the battery, as described in Avaya Scopia
XT Remote Control Unit's battery power is low, an icon appears in the system menus letting
you know that you should replace the battery:
•
Half-charged Battery
•
Low Battery
If the battery power is not low, configure the XT Remote Control Unit code on the XT Codec
Unit to the same number that it is set on the XT Remote Control Unit, as described in
an XT Remote Control Unit
If you still experience problems, reconfigure the XT Remote Control Unit code to be a
number between 01-04, inclusive.
®
System > Factory Defaults.
®
XT Series Installation Guide. When the
on page 13).
XT Series.
Troubleshooting the Avaya Scopia
Pairing
®
XT Series | 61