Avaya Scopia XT Series User Manual page 74

NAT translates between public and private addresses, enabling users toplace calls between public
network users and private network users.
NetSense
NetSense is a proprietary Scopia
the available bandwidth to minimize packet loss. As the available bandwidth of a connection varies
depending on data traffic, NetSense's sophisticated algorithm dynamically scans the video stream, and
then reduces or improves the video resolution to maximize quality with the available bandwidth.
Packet Loss
Packet loss occurs when some of the data transmitted from one endpoint is not received by the other
endpoint. This can be caused by narrow bandwidth connections or unreliable signal reception on
wireless networks.
PaP Video Layout
The PaP (Picture and Picture) view shows up to three images of the same size.
Phantom Power
Microphones which use phantom power draw their electrical power from the same cable as the audio
signal. For example, if your microphone is powered by a single cable, it serves both to power the
microphone and transmit the audio data. Microphones which have two cables, one for sound and a
separate power cable, do not use phantom power.
PiP Video Layout
The PiP (Picture In Picture) view shows a video image in the main screen, with an additional smaller
image overlapping in the corner. Typically, a remote presentation is displayed in the main part of the
screen, and the remote video is in the small image. If the remote endpoint does not show any content,
the display shows the remote video in the main part of the screen, and the local presentation in the small
image.
Point-to-Point
Point-to-point is a feature where only two endpoints communicate with each other without using MCU
resources.
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
®
Solution technology which optimizes the video quality according to
®
Glossary of Terms for Scopia Solution | 74