Avaya Scopia XT Series User Manual page 26

8. To end a meeting, select Disconnect from the web interface, or press Disconnect
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Table 4: Entering advanced call properties
Field Name
Call Protocol or Call profiles
Call Type
Rate or Call Rate
Your call is securely encrypted when it shows a padlock icon
system administrator to configure encryption (see Deployment Guide for Avaya Scopia
Series).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited
for usage. For more information, consult your local reseller.
the XT Remote Control Unit.
If your system administrator defined a time limit for videoconferences, the system displays a
message when the limit is reached.
If necessary, select the protocol to use when calling this
personal endpoint or meeting room:
• Select H.323 for H.323 endpoints, such as other XT
Series endpoints, or when joining a meeting hosted
®
by a Scopia Elite MCU.
• Select SIP for SIP endpoints, such as Microsoft Lync
clients or Avaya IP Office devices.
• Select ISDN to call ISDN endpoints.
Select whether the call is Audio-Video or Audio-Only.
Select the bandwidth to be used when calling this
endpoint. Otherwise, the system uses the maximum
available bandwidth.
Figure 21: Meeting Duration Alert
Description
on the monitor. Ask your
Starting a New Call | 26
®
XT
on