About The Xt Remote Control Unit - Avaya Scopia XT Series User Manual

Procedure
1. Check the light on the front of the XT Codec Unit. When it is connected to power but
2. Press the power
3. The system home page appears on the monitors.
4. Navigate using the XT Remote Control Unit.

About the XT Remote Control Unit

There are several ways to control the Avaya Scopia
XT Remote Control Unit to navigate the endpoint's menus which are displayed on the endpoint's
monitor. Without a monitor, you cannot interact using the XT Remote Control Unit.
Other ways to control and interact with the XT Series include:
• Using the web interface (see
• Using Scopia
Control).
The XT Remote Control Unit has an improved design for a more efficient videoconferencing experience
(Figure 5: The XT Remote Control Unit
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
switched off, the LED blinks.
key on the XT Remote Control Unit to turn on the XT Codec Unit. When
switched on, the LED remains on (no blinking).
When you access the system for the first time only, the Quick Setup wizard is displayed (see
Configuring Basic Settings with the Quick Setup Wizard
Accessing XT Series Web Interface
®
Control on an Apple iPad to control user functionality (see User Guide for Scopia
®
XT Series. This section explains how to use the
on page 12).
on page 15).
on page 14).
Getting Started | 11
®