2. Drag the Volume slider to set the value.
3. From the web interface only, select Save.
Connecting a Computer to the XT Series
About this task
Connect a computer to share a presentation or other content during a call. You connect the video
separately from the audio. The computer video is routed to the DVI port on the XT Codec Unit, while the
audio is routed to the audio-in
When you share a computer's sound during a call, remote participants hear the computer's audio output
as well as the audio from the Microphone Pod. However, analog microphones like the one-way
Microphone Pod use the same audio-in
time, connect them via an audio mixer (see Deployment Guide for the Avaya Scopia
Procedure
1. If your computer has a DVI port, connect it to the DVI port on the XT Codec Unit.
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
port.
Alternatively, use the supplied DVI-VGA adapter to connect a VGA cable from the adapter to
the computer's VGA port.
Figure 33: Call-Answer settings
port as a connected computer, so to use both at the same
®
XT Series).
Participating in Meetings | 34