Activating The Screen Saver - Avaya Scopia XT Series User Manual

2. Select the required option from the Automatic answer list:
3. (Optional) Enter the number of rings in the Answer after (Rings) list to specify after how
4. From the web interface only, select Save.

Activating the Screen Saver

About this task
The screen saver helps protect your monitor from burn-in without switching it off.
Your administrator may have configured the screen saver to start automatically when Avaya Scopia
Series is not used for some time.
You can activate the screen saver at any time by pressing the
Unit.
By default, the XT Series stops sending to the monitor after 15 minutes. You can modify this in the
Monitor Turn Off field. From the XT Series web interface, select Configure > Advanced > I/O
Connections > Monitor > General. From the endpoint's main menu, select Advanced Settings > I/O
Connections > Monitor > General.
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 55: Setting call answer preferences
• Select Yes always for the system to automatically answer an incoming call. The
system will not prompt you to accept a call if the display shows the Home page. This is
useful for meeting rooms, where endpoints often dial in to that meeting room.
• Select Never to always manually accept a call.
• Select Yes if not in a call (only XT Series with a built-in MCU) to automatically answer
when the system is not in a call. During a call, it displays an incoming call notification. If
you accept an incoming call during a call, you add the caller to your videoconference.
many rings the system accepts a call. This option is relevant only if automatic answering is
enabled.
Power key on the XT Remote Control
Configuring Advanced User Settings | 52
®
XT