Operation
Accessing Charger Information
The BC Series can give you a lot of information about the status of the charger and
the batteries.
Reading Onboard Status Indicator Lights and Remote Display
The onboard status panel and optional remote display show what is happening
during the charging process and are also helpful in troubleshooting. Refer to
Chapter 3, "Troubleshooting" for more information about interpreting the onboard
status indicator lights and optional remote display.
The optional remote display is designed to report on the active status of the charger.
While the unit is charging, the optional remote display reports only on the battery
being charged at that moment. It does not report the status of other batteries.
The Ready light on the onboard status indicator panel only illuminates when all
connected banks have reached float ( f l o ) of 3-stage charging or rest ( r d y ) of 2-
stage charging. If one of the three batteries has been disqualified before it reaches
float/rest stage, while the others have reached float ( f l o ) of 3-stage charging or rest
( r d y ) of 2-stage charging, the Ready light on the onboard status indicator panel will
not illuminate.
2–12
975-0188-01-01