Danfoss VLT 2800 Design Manual page 128

Programming
Parameter 700 -
Only for wobble functions: To use this function or for
further information, see Wobble Function Instruction.
678 Configure Control Card
Value:
Standard version (STANDARD VERSION)
Profibus 3 Mbaud Version (PROFIBUS 3 MB Ver.)
4 4
Profibus 12 Mbaud Version (PROFIBUS 12 MB Ver.)
Function:
Configure a Profibus control card. The default value
depends on the produced unit, also being the maximum
obtainable value. This means that a control card only can
be downgraded to a lower performance version.
126
Design Guide
[1]
[2]
[3]
Danfoss A/S © Rev. May/2014 All rights reserved. MG27E402