Peer Label-Route-Capability (Bgp View/Bgp Vpn Instance View) - H3C S9500 Series Command Manual

Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Examples
# In BGP-VPNv4 subaddress family view, specify to filter the received routes of a peer
group using IP prefix list list1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer group1 ip-prefix list1 import

1.1.35 peer label-route-capability (BGP view/BGP VPN instance view)

Syntax
peer { ip-address | group-name } label-route-capability
undo peer { ip-address | group-name } label-route-capability
View
BGP view/BGP VPN instance view
Default Level
2: System level
Parameters
ip-address: IP address of the peer.
group-name: Name of the peer group.
Description
Use the peer label-route-capability command to enable the exchange of labeled
routes with an IPv4 peer or peer group.
Use the undo peer label-route-capability command to disable the capability.
By default, the device does not advertise labeled routes to an IPv4 peer.
According to the networking scheme, the peer label-route-capability command
enables the exchange of labeled IPv4 routes with:
ASBR PEs in the same AS.
PEs in the same AS.
the peer ASBR PE.
Examples
# Specify to exchange labeled IPv4 routes with peer 2.2.2.2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 2.2.2.2 label-route-capability
Chapter 1 MPLS L3VPN Configuration Commands
1-44