Limitation Of Access Schedules - Honeywell ADEMCO VISTA-120 Installation And Setup Manual

PROMPT
Quit ?
1 = YES 0 = NO 0

Limitation of Access Schedules

Limitation of Access is a means by which a user's access
code is limited to working during a certain period of
time. The system provides 8 Access Schedules, each of
which consists of two time periods for each day of the
week and two time periods for holidays (typically, one
for an opening time period and the second for a closing
time period).
A user, required to follow a schedule, would be assigned
to an access group of the same number (e.g., schedule
1= group 1).
Acc Mon
Sch W1 W2
1
2
3...8
Limitation of Access Schedules Programming
To program access schedules, do the following:
Enter Scheduling Menu Mode Installer Code + # 80. After entering Scheduling Menu Mode, press [0] until the "Access
Sched. ?" prompt appears.
PROMPT
Access Sched. ?
1 = YES 0 = NO 0
ACCESS SCHED # ?
01-08, 00 = Quit 01
MON A1 Window 1?
00:00 00:00 00
MON A1 Window 2 ?
00:00 00:00 00
TUE A1 Window 1?
00:00 00:00 00
Hol A1 Window 1 ?
00:00 00:00 00
Hol A1 Window 2 ?
00:00 00:00 00
EXPLANATION
Enter 0 at the "Quit ?" prompt to return to the main menu choices and continue programming. Enter 1 to quit
Scheduling Menu Mode.
Tues Wed
W1 W2 W1 W2
EXPLANATION
Enter 1 to program access schedules.
Enter the access control schedule number between 01 and 08. Enter 00 to quit the access control menus
and display the Quit ? prompt.
Press [✳] to accept entry.
Enter the first time-period number (01-20) for this access schedule for the displayed day. As the number is
keyed in, the actual time that has been stored for the time period is displayed.
Press [✳] to continue.
Enter the second time-period number from 01-20 for this access schedule for the displayed day. As the
number is keyed in, the actual time that has been stored for the time period is displayed.
Press [✳] to continue.
Repeat the procedure for the other days of the week. When the last day of the week has been programmed,
the time periods for holidays may be entered.
Enter the first time-period number for holidays for this access schedule. As the number is keyed in, the
actual time that has been stored for the time period is displayed.
Press [✳] to continue.
Enter the second time-period number for holidays for this access schedule. As the number is keyed in, the
actual time that has been stored for the time period is displayed.
Press [✳] to continue.
The user's access code is assigned to a group when that
user is added to the system. If no limitations apply,
enter 0.
NOTE: Holidays used for access groups are those
defined for partition 1 only.
Limitation of Access Schedule Worksheet
Enter the appropriate time period numbers for each
access schedule.
Thurs Fri
W1 W2 W1 W2 W1
Section 6 - Scheduling Options
Sat Sun Hol
W2 W1 W2 W1 W2
6-11