Honeywell ADEMCO VISTA-120 Installation And Setup Manual page 80

VISTA-120 Installation and Setup Guide
ACTION CODES
42=Enable Access Time
Period for Access
group(s)
55=Access Point Grant
56=Access Point Grant
w/Override
57=Access Point Protect
58=Access Point Bypass
59=Access Point Lock
60=Access Point Exit
61=Access Point Group Grant
62=Access Point Group Grant
w/Override
63=Access Point Group
Protect
64=Access Point Group
Bypass
65=Access Point Group Lock
66=Access Point Group Exit
77=Access Point Group
Enable
78=Access Point Group
Disable
67=Access Point Partition
Grant
68=Access Point Partition
Grant w/Override
69=Access Point Protect by
Partition
70=Access Point Bypass by
Partition
71=Access Point Lock by
Partition
72=Access Point Exit by
Partition
73=Access Point Trigger On
74=Access Point Trigger Off
PROMPT
01 Time Window ?
00:00 00:00 01
01 Active time ?
00
Days ? MTWTFSSH
Hit 0-8 x x
6-10
EXPLANATION
Action 42
If you selected action 42, the prompt at the right appears. Enter the group
number to which the time period will apply.
Press [✳] to accept entry. The "Time Window ?" prompt appears.
Actions 55-60
If you selected actions 55-60, the prompt at the right appears. Enter the
access point number.
Press [✳] to accept entry. The "Time Window ?" prompt appears.
Actions 61-66 and 77-78
If you selected actions 61-66, the prompt at the right appears. Enter the
group number.
Press [✳] to accept entry. The "Time Window ?" prompt appears.
Actions 67-72
If you selected actions 67-72, the prompt at the right appears. Enter the
partition to which the action applies. Enter 0 to select all partitions. Enter a
partition number again to deselect it.
Press [✳] to accept entry. The "Time Window ?" prompt appears.
Actions 73-74
If actions 73-74 were selected, the prompt at the right will be displayed. Enter
the trigger number.
Press [✳] to accept entry. The "Time Window ?" prompt appears.
EXPLANATION
Enter the time period number (01-20) for which this timed event is to occur. As the number is keyed in, the
actual time that has been stored for the time period number is displayed.
Press [✳] to accept entry.
Enter the activation time from 1-10 (listed below). As the number is keyed in, the activation time is
displayed. The choices are:
01: Trigger at the start of the time period.
02: Trigger at the end of the time period.
03: Take effect only for the duration of the time period.
04: Trigger at both the start and the end of the time period. Example: coffee break buzzer.
Press [✳] to accept entry.
The system then asks for which days the event is to be activated.
Press 0 to toggle all days on or off; or press keys 1-8 to toggle the letter "x" under the day on or off
(Monday = 1, Holiday = H = 8).
When all entries have been made, the "TIMED EVENT #?" prompt is displayed again.
Repeat the procedure for each timed event for the installation.
ACTION SPECIFIER
GROUP ? 12345678
HIT 0-8 X
01 ACCESS POINT #
000
01 GROUP #
00
PART? 12345678
HIT 0-8 X X
01 TRIGGER #
00