Appendix A: Specifications - Honeywell ADEMCO VISTA-120 Installation And Setup Manual

Partitioned security system with scheduling
Hide thumbs Also See for ADEMCO VISTA-120:
Table of Contents

Advertisement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
VISTA-120 CONTROL
Physical:
Electrical:
Voltage Input:
Alarm Sounder Output:
Auxiliary Power Output:
Backup Battery:
Standby Time:
Circuit Protectors:
Digital Communicator
Formats Supported:
Line Seize:
Remote Keypads
6139
Physical:
Width:
150mm
Height:
121mm
Depth:
32mm
Electrical:
Voltage Input:
12VDC
Current Drain: 100mA
Interface Wiring:
RED:
12VDC input (+) auxiliary power
BLUE:
Not Used
GREEN:
Data to control panel
YELLOW:
Data from control panel
BLACK:
Ground and (-) connection from
supplemental power supply
318mm Wide X 368mm High X 76mm Deep
In 110 volt AC mains systems, from ADEMCO No. 1361 Plug-In Transformer or 4300
transformer (for X-10 installations) rated 16.5VAC, 40 VA or XF10 transformer (for
220VAC, 50Hz X-10 installations)
10VDC-13.8VDC (10.7VAC-14.5VAC for VISTA-120FR), 2.8 amps max.; 750mA less
aux. current drain
9.6VDC-13.8VDC, 750mA max.
12VDC, 4AH or 7AH gel cell. No. 467 (12V, 4AH) or 712BNP (12V, 7AH)
recommended.
4 hours min. with 750 mA aux. load using 7 AH battery.
PTC circuit breakers are used on battery input to protect against reverse battery
connections and on alarm sounder output to protect against wiring faults (Shorts).
A solid-state circuit breaker is used on auxiliary power output to protect against wiring
faults (shorts).
ADEMCO High Speed, ADEMCO 4 + 2 Express, ADEMCO Low Speed, Robofon
Contact ID, ADEMCO Contact ID, Sescoa and Radionics Low Speed
Double Pole
A P P E N D I X
Specifications
6164
Physical:
Width:
187mm
Height:
137mm
Depth:
32mm
Electrical:
Voltage Input:
12VDC
Current Drain: 55-190mA
Interface Wiring:
RED:
12VDC input (+) auxiliary power
BLACK:
Ground and (-) connection from
supplemental power supply
GREEN:
Data to control panel
YELLOW:
Data from control panel
The following terminals on the 6164 are not used
with the VISTA-120:
Z1
Z2
Z3
Z4
NO
C
NC
A
A-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents