Honeywell ADEMCO VISTA-120 Installation And Setup Manual page 12

VISTA-120 Installation and Setup Guide
1*12, 1*15, 1*18 - Affects Common Area (must be programmed by partition)
Setting this option to 1 for a specific partition causes that partition to affect the operation of the common area as follows:
a. When the first partition that affects the common area is disarmed, the common area will also be disarmed.
b. The common area cannot be armed unless every partition selected to affect the common area is armed.
c. Arming the last partition that affects the common area will not automatically attempt to arm the common area.
1*13, 1*16, 1*19 - Arms Common Area (must be programmed by partition)
Setting this option to 1 for a specific partition causes that partition to affect the operation of the common area as follows:
a. When the first partition that affects the common area is disarmed, the common area will also be disarmed.
b. The common area cannot be armed unless every partition selected to affect the common area is armed.
c. Arming the last partition that is programmed to arm the common area will automatically attempt to arm the
common area. If any faults exist in the common area partition, or another partition that affects the common area is
disarmed, the common area cannot be armed, and the message "UNABLE TO ARM LOBBY PARTITION" will be
displayed.
You cannot select a partition to "arm" the common area unless it has first been selected to "affect" the
common area. Enable field 1*12, 1*15, 1*18 before enabling field 1*13, 1*16, 1*19 respectively.
The following chart summarizes how the common area partition will operate if different options are set for another
partition in fields 1*12, 1*15, 1*18 and 1*13, 1*16, 1*19.
1*12, 1*15, 1*18
Affects
Common Area
0
1
1
0
Example
Here is an example of how the Common Area would react in a typical setup.
OFFICE #1
COMMON AREA
MAIN ENTRANCE
Sequence #1:
User #1:
User #2:
User #1:
User #2:
2-2
1*13, 1*16, 1*19 Disarms when
partition
Arms Common
disarms?
Area
0
0
1
1
OFFICE #2
Office 1 Office 2
Disarms (Armed)
(Disarmed) Disarms
Arms (Disarmed)
(Armed) Arms
Attempts to arm
when partition
arms?
NO NO
YES NO
YES YES
---ENTRY NOT ALLOWED---
User #1 has access to Office #1 and the Common Area.
User #2 has access to Office #2 and the Common Area.
Office #1 is set up to affect the Common Area, but not arm
it.
Office #2 is set up to affect and arm the Common Area.
NOTE: In the tables below, the notations in parentheses ( )
indicate the current status of the other partition when the
user takes action.
Common Area Action
Disarms
No Change
No change
Arms
Can be armed if
other partitions
disarmed?
YES
NO
NO