Process Values - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Option
Simulation
Security
Restore ordered configuration
Communication
Table 6-2
Option
Process values (online dialog)
Device Diagnostic (online dialog)
Toolbar (online dialog)
Status Bar
Update
6.3.10

Process values

1. To compare outputs in real time select "View" > "Process values" to see all process values,
totalizers and loop current.
2. Verify that the process values show the expected values.
Figure 6-5
Trend view
Open the menu "View" > "Process values" and click on one of the "Trend view" buttons to monitor
the trend of one or all process values available at each tab.
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
Menu "View"
Process variables
6.3 Remote commissioning with PDM FCT010
Description
Start simulation for testing purposes.
Select or change access level.
Set all parameters to customer ordered settings.
Show communication settings.
Description
Show all process values.
Show all diagnostics information (alarms and diagnostics
parameters).
Show or hide the toolbar.
Show or hide the status bar.
Update the content of the active window.
Commissioning
67