Seat Alhambra Owner's Manual page 99

To replace the xenon headlight
bulb
In the engine compartment: turning
Fig. 109
light cover.
Turn signal bulb holder
Fig. 110
light .
2
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
Fuses and bulbs
Turn signals
1. Open the bonnet
Rotate the cover
2.
Rotate the bulb holder
›››
Fig. 110
1
3. left all the way and
pull it out backwards
together with the bulb.
Depending on the model, the bulb is removed
4. directly from the bulb holder or it may need to
be rotated and then removed.
Replace the faulty bulb with a new identical
5.
Place the bulb holder
in the headlight and
6.
rotate to the right all
the way.
Rotate the cover
7.
rection to the arrow as far as it will go.
Always seek the help of a specialist when
changing the Xenon dipped beam and main
beam headlamps
and turning
1
page 94.
Note
The illustrations show the left hand head-
light. The structure of the right hand side
headlight is symmetric.
Turning lights
1 2
›››
page 323.

›››
Fig. 109 in the direction of
the arrow and remove it.
Press the wire clip
to the downwards and pull
the bulb holder
2
›››
Fig. 110 out togeth-
er with the bulb.
bulb.
Place the bulb holder
in the headlight and
pull the wire clip up-
wards until it clicks in-
to place.
›››
Fig. 109 in the opposite di-
›››
in Introduction on
Replacing the front bumper bulbs
On the right side of the front bumper:
Fig. 111
detaching he headlights.
Changing the bulbs in the headlights
Fig. 112
Complete operations only in the sequence
given:
»
97