Seat Alhambra Owner's Manual page 284

Operating the Adaptive Cruise
Control ACC
On the left of the steering column:
Fig. 264
third lever for operating the Adaptive Cruise
Control.
On the left of the steering column:
Fig. 265
third lever for operating the Adaptive Cruise
Control.
When the Adaptive Cruise Control (ACC) is
connected, the green control lamp
light up on the instrument panel, and the pro-
282
grammed speed and ACC status will be dis-
›››
played Fig. 262.
What ACC settings are possible?
Setting your speed
●
Setting your distance
●
Connecting and activating the ACC
●
›››
page 282.
Disconnecting and deactivating the ACC
●
›››
page 283.
Adjusting the default distance level at the
●
start of your journey
Adjusting the driving profile
●
Conditions in which the ACC does not re-
●
›››
act page 283.
Setting speed
To set your speed, move the third lever loca-
ted in position
1
the desired speed is shown on the instrument
panel display. The speed adjustment is made
at 10 km/h (6 mph) intervals.
Once you are driving, if you wish to set the
current speed as the vehicle's cruise speed
and activate the ACC, press the
›››
Fig. 265 button. If you wish to increase or
reduce speed by intervals of 1 km/h (0.6
mph), move the lever to position
›››
Fig. 264 or press the
tively.
will

Driving
›››
page 282.
›››
page 282.
›››
page 283.
›››
page 283.
upwards or downwards until

2
button, respec-

The set speed can be changed when the ve-
hicle is stopped or during driving, as you like.
Any modification to the programmed speed
will be shown on the bottom left part of the
›››
instrument panel display Fig.
Setting your distance level
To increase/reduce the distance level, press
the rocker switch towards the left/right
›››
Fig. 265 .
A
The instrument panel display shows the mod-
ification of the distance level. There are 5 dis-
tance levels to choose from. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or dur-
ing driving, as you like.
Connecting and activating the ACC
To connect and activate the ACC, the posi-
tion of the gearbox selector lever, the vehicle
speed and the position of the third level of the
ACC must all be taken into account.
With a manual transmission, the gearbox
●
selector lever must be in any gear except
first, and the speed must be higher than ap-
proximately 30 km/h. With an automatic
transmission, the gearbox selector lever must
be in position D or S.
To activate the ACC, with the third lever in
●
position press the button or move the

1
third lever of the ACC to position
›››
Fig. 264. At this point, the image of the
262.
2