Storing front passenger exterior mirror
settings for driving in reverse gear
Connect the automatic parking brake.
●
Move the gear lever to neutral.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger side exterior mir-
●
ror so that you can see, for example, the kerb
area.
The new position of the mirror will be stored
●
automatically and allocated to the vehicle
key that was used to unlock the vehicle.
Activating exterior mirror settings
With the driver door open and the ignition
●
turned off, push the memory button of the
corresponding door briefly.
OR: with the ignition switched on, hold in
●
the corresponding memory button until the
memorised position is reached.
To activate the memory function of the ve-
hicle key
Condition: a position must be memorised in
the memory.
Open the driver-side door.
●
Press and hold any memory button.
●
152
Operation
Within the following three seconds, push
●
the open button
on the vehicle key. An au-
dible warning confirms the settings have
been activated.
Adjusting the wing mirrors for driving and
assigning driver seat settings to a vehicle
key
Activate the memory function of the vehicle
●
key
Adjust the front seat and the exterior mir-
●
rors.
Lock the vehicle. The settings are assigned
●
to the vehicle key.
To deactivate the memory function of the
vehicle key
Condition: a position must be memorised in
the memory.
Press and hold the
button.
●
SET
Within the following 10 seconds, push the
●
open button
on the vehicle key. An audible
warning confirms the settings have been de-
activated.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.
Open the driver door and do not get into
●
the vehicle.
Operating the seat settings from outside
●
the vehicle.
Move the angle of the seat backrest com-
●
pletely forwards.
Release the control to set the angle and
●
then press again until an audible warning is
heard.
Note
The front passenger side exterior mirror au-
tomatically changes from the position stor-
ed for reversing as soon as the vehicle
moves forward at a speed of at least
15 km/h (9 mph) or when the gear selection
lever is changed to a position other than R.