CAUTION
All of the vehicle keys contain electronic
components. Protect them from damage,
impacts and humidity.
Note
Only use the key button when you require
●
the corresponding function. Pushing the
button unnecessarily could accidentally
unlock the vehicle or trigger the alarm. It is
also possible even when you are outside
the radius of action.
Key operation can be greatly influenced
●
by overlapping radio signals around the ve-
hicle working in the same range of frequen-
cies (e.g. radio transmitters, mobile tele-
phones).
Obstacles between the remote control
●
and the vehicle, bad weather conditions
and draining batteries can considerably re-
duce the range of the remote control.
Opening and closing
Control lamp on the vehicle key
Control lamp on the vehicle key
Fig. 128
When a button on the vehicle key is pressed,
›››
the control lamp flashes
Fig. 128
once briefly. If the button is pressed and held,
the indicator blinks several times (e.g. for the
convenience opening function).
When the control lamp does not light upon
pushing a button, the batteries of the key
›››
must be changed
page
115.
Replacing the battery
Vehicle key: battery compartment
Fig. 129
cover.
(arrow)
Vehicle key: remove the battery.
Fig. 130
SEAT recommend having the batteries
changed in a specialised workshop.
The battery is located to the rear of the vehi-
cle key, under a cover
»
›››
Fig.
129.
115