Seat Alhambra Owner's Manual page 282

Maximum speed with the ACC activated
●
is limited to 210 km/h (130 mph).
When the ACC is switched on, strange
●
noises may be heard during automatic
braking cause by the braking system.
Symbols on the instrument panel
display and control lamps
The speed reduction by the ACC
 to maintain the distance from the
vehicle in front is not sufficient.
Brake! apply the foot brake! Driver intervention
prompt.
The ACC is not currently availa-

ble. a)
With the vehicle stationary, switch off the engine and
start it up again. Check the SEAT badge area on the
›››
front Fig. 263 (in case it is dirty or icy or it has
been hit). If it is still unavailable, refer to a specialised
workshop to have the system inspected.
a)
The symbol on the instrument panels with colour
display is in colour.
 The ACC is active.
No vehicle is detected in front. The programmed
speed remains constant.
280
Driving
If the symbol is white: the ACC is

active.
A vehicle in front has been detected. The ACC ad-
justs speed and distance from the vehicle in front.
If the symbol is grey: ACC is inac-

tive (Standby)
The system is switched on, but is not adjusting.
 It lights up green
The ACC is active.
Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
WARNING
›››
Observe the safety warnings
trol and warning lamps on page
Indications on the display
in Con-
109.
On the instrument panel display: (A)
Fig. 262
ACC inactive (Standby). (B) ACC active.
Status display
Indications on the display
Vehicle ahead detected. ACC is not ac-
1
tive and is not regulating your speed.
Distance from the vehicle ahead. ACC is
2
not active and is not regulating your dis-
tance.
›››
Fig. 262: