Seat Alhambra Owner's Manual page 151

Fitting the head restraints in the sec-
Fig. 157
ond or third row of seats
All seats are equipped with a head restraint.
Removing the front head restraints in vehi-
cles without the lengthways direction ad-
justment of the head restraints
If necessary, adjust the seat backrest so
●
that the head restraint can be fitted.
Push the head restraint up as far as it will go
●
›››
.
Pull out the head restraint pressing the but-
●
›››
ton completely Fig. 156 A.
1
Fitting the front head restraints in vehicles
without the lengthways direction adjust-
ment of the head restraints
Correctly place the head restraint into the
●
guides on the seat backrest and insert it.
Completely press the button
●
the head restraint downwards.
Seats and head restraints
Adjust the head restraint according to the
●
correct seat position and secure it
›››
page 148.
Removing the front head restraints in vehi-
cles with the lengthways direction adjust-
ment of the head restraints
If necessary, adjust the seat backrest so
●
that the head restraint can be fitted.
Push the head restraint up and backward
●
as far as it will go
Place a flat object, e.g. a plastic card
●
on both sides between the seat backrest cov-
er and the end protector of the seat backrest
retaining bar and unlock the retaining bars
with a little pressure.
Completely pull out the head restraint.
●
Fitting the front head restraints in vehicles
with the lengthways direction adjustment
of the head restraints
Pull out the two retaining bars from the
●
head restraint as far as possible.
Correctly place the head restraint into the
●
guides on the seat backrest and insert it.
Push the head restraint down as far as pos-
●
sible until the two retaining bars are secured.
Adjust the head restraint according to the
●
correct seat position and secure it
›››
page 148.
A and push
1
›››
.
B,
2
Removing the head restraints from the
second and third row of seats
Fold the backrest of the rear seat forwards
●
›››
page 157.
Push the head restraint up as far as it will go
●
›››
.
›››
Pull out the head restraint
●
with the button pressed.
Fold the backrest of the rear seat back-
●
wards until it is engaged.
Fitting the head restraints in the second
and third row of seats
Fold the backrest of the rear seat forwards
●
›››
page 157.
Insert the head restraint into the guides on
●
the seat backrest.
Push the head restraint down while press-
●
ing the button .
1
Fold the backrest of the rear seat backward
●
again until it is engaged.
Adjust the head restraint to the correct po-
●
›››
sition page 147.
WARNING
Travelling with the head restraints removed
or improperly adjusted increases the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres.
Fig. 157
1
»
149