Information About The Eu Directive; 2014/53/Eu - Seat Alhambra Owner's Manual

Note
If electrical equipment is used near an aer-
ial built-into the window, you may observe
interference in the reception of AM sta-
tions.
Notes on SEAT repairs
WARNING
Repairs or modifications which are not per-
formed correctly may result in damage or
errors in the vehicle operation, affecting
the effectiveness of the driver assist and
airbag systems. This could result in serious
accident.
Have any repairs or modifications carried
●
out at a specialised workshop.
Collection and scrapping of end-
of-life vehicles
Collection of end-of-life vehicles
An extensive network of used car reception
centres already exists in much of Europe. Af-
ter the vehicle has been delivered, you will re-
ceive a certificate of destruction describing
the environmentally friendly scrapping of the
vehicle in accordance with applicable legis-
lation.
360
Information for the user
We will collect the used vehicle free of
charge, provided it complies with all national
legislation.
Please see your technical service for further
information about the collection and scrap-
ping of end-of-life vehicles.
Scrapping
The relevant safety requirements must be ob-
served when the vehicle or components of
the airbag or belt tensioner systems are
scrapped. These requirements are known to
specialised workshops.
Recycling of electrical or electron-
ic devices
All electrical or electronic devices (EED) that
are not permanently fitted in the vehicle must
be marked with the following symbol:

This symbol indicates that EED must not be
discarded as home waste but through selec-
tive waste collection.
Information about the EU Di-
rective 2014/53/EU
Simplified EU compliance declara-
tion
Your vehicle has different radioelectrical devi-
ces. The manufacturers of these devices de-
clare that they comply with Directive
2014/53/EU when legally required.
The full text of the EU compliance declaration
is available online at the following address:
www.seat.com/generalinfo
Table of correspondences
The table of correspondences will help you to
associate the name of the device in the dec-
laration of compliance with the features of
the vehicle and the terminology used in the
on-board documentation.
Features of the Name of the device
vehicle according to the dec-
laration of compli-
ance
Radiofrequency re- FS09, FS12A, FS12P, FS1477,
mote control (vehicle) FS94
