Seat Alhambra Owner's Manual page 25

Different mounting systems
Always secure child seats properly and safe-
ly in the vehicle according to the child seat
manufacturer's installation instructions.
Mounted child seats must rest correctly on
the vehicle's seat and must not move or rock
more than 2.5 cm (1 inch).
Child seats equipped for a Top Tether strap
must also be secured using the Top Tether re-
›››
taining strap in the vehicle page
secure the retaining belt to the rings fitted for
this purpose and identified as Top Tether. Not
all rings can be used with the Top Tether sys-
tem. Always tighten the Top Tether retaining
strap so that the child seat fits snugly against
the corresponding seat in the vehicle.
The essentials
Specific mounting systems for each coun-
try
Europe: ISOFIX retaining rings and upper
A
retaining strap
›››
page 24.
Three-point seat belt and upper retaining
B
›››
strap page
The systems include the child restraint
24. Only
system mounting with an upper retaining
strap (Top Tether) and lower anchoring
points on the seat.
Fig. 38
dren seats.
›››
page 24 and
23.
On rear seats: possible assemblies of chil-
Securing child seats with the seat
belt
Securing the child seat using the seat belt
Please read and observe the child seat
●
manufacturer's handling instructions.
Positioning the child seat on the seat ac-
●
cording to the manufacturer's instructions.
The seat belt height adjustment must be as
●
high as possible.
Fasten the seat belt or pass it around the
●
child seat structure in the manner described
in the manufacturer's instructions.
Make sure the seat belt is not twisted.
●
Insert the latch plate into the buckle for the
●
appropriate seat and push it down until it is
securely locked with an audible click.
»
23