When the turn signal is connected.
●
BSD Plus (Lane Assist with Blind Spot De-
tector)*
The BSD Plus function is achieved by activat-
ing the Lane Assist and BSD functions
›››
page
289. In this case, the Lane Assist
function expands its functions in the following
way:
If the driver tries to change lane and there is a
vehicle in the blind spot:
The
lamp flashes in the corresponding
●
rear-view mirror even though the turn signal
has not been activated.
The steering wheel vibrates to warn the
●
driver of the risk of collision.
torque is applied to correct the steering
●
and return the vehicle to its lane.
Disconnect the lane assist system in the
following situations
Due to the limits of the Lane Assist system,
switch it off in the following situations:
When more attention is required of the driv-
●
er
For very sporty driving
●
In very unfavourable weather conditions
●
In very unfavourable road conditions
●
In areas of road works
●
288
Driving
WARNING
The intelligent technology in the lane assist
system cannot change the limits imposed
by the laws of physics and by the system it-
self. Careless or uncontrolled use of the
Lane Assist system may cause accidents
and injury. The system is not a replacement
for driver awareness.
Always adapt your speed and the dis-
●
tance to the vehicles ahead in line with visi-
bility, weather conditions, the condition of
the road and the traffic situation.
Always keep your hands on the steering
●
wheel so you can turn it at any time.
The lane assist system does not detect
●
all road markings. In some circumstances,
the poor state of the road, structures loca-
ted on it or certain objects may be mistak-
enly recognised as road markings by the
lane assist system. In such situations,
switch the lane assist system off immedi-
ately.
Pay attention to the instructions on the
●
instrument panel display and act accord-
ingly to its requests.
Always pay attention to the vehicle's sur-
●
roundings.
Note
The lane assist system has been exclu-
●
sively developed for driving on asphalted
roads.
If the lane assist system does not work as
●
described in this chapter, do not use it and
contact a specialised workshop.
If you observe any system malfunction,
●
have the system checked by a specialised
workshop.
Before starting travel, verify that the
●
camera's field of vision is not covered
›››
Fig.
268.
Keep the camera window clean.
●