Seat Alhambra Owner's Manual page 123

located on the exterior part of the driver or
passenger door handle until the windows and
roof close.
Opening the doors by touching the sensor
surface on the handle takes places in ac-
cordance with the settings activated on the
menu Configuration - Convenience
›››
 page 28.
CAUTION
The sensor surfaces on the door handles
could engage if hit with a water jet or high
pressure steam if there is a valid vehicle
key in the nearby area. If at least one of the
windows is open and the sensor surface
on one of the handle permanently acti-
vates, all windows will close. If the water jet
or steam is briefly moved away from the
sensor surface on one of the handles
A
and then pointed at it again, all the win-
›››
dows will probably open page 120, Con-
venience functions.
Note
If the vehicle battery has little or no
●
charge, or the vehicle key battery is almost
or entirely out of charge, you will probably
not be able to lock or unlock the vehicle
with the Keyless Access system. The vehi-
cle can be unlocked or locked manually
›››
page 93.
If there is no valid key inside the vehicle
●
or the system fails to detect one, a warning
Opening and closing
will display on the dash panel screen. This
could happen if any other radio frequency
signal interferes with the key signal (e.g.
from a mobile device accessory) or if the
key is covered by another object (e.g. an
aluminium case).
If the sensors are very dirty, e.g. have a
●
layer of salt, how the sensors on the door
handles operate may be affected. If this is
the case, wash the vehicle
If the vehicle is equipped with an auto-
●
matic gearbox, it may only be locked in the
gear stick is in position P.
To improve the safety of your vehicle, the
●
remote control of the system is equipped
B
with a position sensor. If this remote control
does not detect movement for a certain
length of time, the system will conclude
that the vehicle cannot be opened (e.g. on
a night table) so it will be disabled.
Safe security system "Safe"
Function Necessary operations
Lock the vehicle and
Press the
activate the "Safe"
the vehicle key.
security system.
Function
Lock the vehicle with-
out activating the
"Safe" security sys-
tem.
›››
page 352.
Depending on the vehicle, when switching the
ignition off, a warning may be displayed on
the dash panel screen stating that the "Safe"
security system is activated ( SAFE Lock or
SAFELOCK
Disabling the "Safe" security system
The "Safe" security system may be disabled
in any of the following ways:
Press the
●
Touch the Keyless Access close and ignition
●
lock sensor surface located on the exterior
part of the door handle twice
button once on

Switch the ignition on.
●
Press the ignition push button of the Keyless
●
Access lock and ignition system.
Necessary operations
Press the button twice on

the vehicle key.
Touch the Keyless Access
close and ignition lock sen-
sor surface located on the
exterior part of the door
›››
handle twice page 119.
Press the central locking
button on the driver door

once.
).
button on the vehicle key twice.

›››
page 119.
»
121