Seat Alhambra Owner's Manual page 33

Current warning or information
texts.
This option only appears when one
Vehicle sta-
of the following texts is available.
tus
The number of available messages
is displayed. Example 1/1 or 2/2.
›››
page 104
Different setting options, for exam-
ple, the Convenience, Lighting &
Visibility menus, and the time, speed
Setup warning with winter tyres, language,
units of measurement or driver as-
sistance systems.
›››
page 32
Menu
Multi-function display
(MFA)
The multifunction display (MFD) has two au-
tomatic memories: 1 - Partial memory and 2
- Total memory. The selected memory will
be shown in the upper right-hand corner of
the display.
The essentials
With the ignition switched on, and memory
1 or 2 displayed, briefly press
change from one memory to another
The memory stores the values for the
journey and the consumption from the
moment the ignition is switched on un-
til it is switched off again.
1
Trip memo- If the journey is broken for more than 2
ry (for a hours, the memory is automatically
single jour- erased. If the journey is continued in
ney). less than 2 hours after the ignition is
switched off, the new data is added to
the data already stored in the memo-
ry.
The memory records the values for a
specific number of partial trips, up to a
total of 19 hours and 59 minutes or 99
hours and 59 minutes, or 1,999.9 km
2
Total mem- (or miles) for 9,999 km (or miles), de-
ory (for all pending on the model of instrument
journeys). panel. On reaching either of these lim-
its, the memory is automatically
erased and starts to count from 0
again.
Possible displays
This indicates the hours (h) and mi-
Travelling
nutes (min) since the ignition was
time
switched on.
The current fuel consumption while
driving is displayed in l/100 km (or
Current fuel
miles per gallon, mpg); when the
consump-
engine is running but the vehicle is
tion
not moving, in l/h (or gallons per
hour).
to
OK
Average fuel
consump-
tion
Operating
range
Distance
covered
Average
speed
Digital dis-
play of
speed
Oil tempera-
ture digital
display
Speed warn-
ing at ---
km/h
When the ignition is switched on, the
average consumption (in l/100 km
or in mpg) is displayed after the ve-
hicle has moved approximately
100 metres (328 feet). Otherwise
horizontal lines are displayed. The
value shown is updated approxi-
mately every 5 seconds.
Approximate distance in km (or
miles) that can still be travelled with
the fuel remaining in the tank, as-
suming the same style of driving is
maintained. This is calculated using
the current fuel consumption.
Distance travelled, after ignition is
switched on, in km (or miles).
After the ignition is switched on, the
average speed will be shown after a
distance of approximately 100 me-
tres (328 feet) has been travelled.
Otherwise horizontal lines are dis-
played. The value shown is updated
approximately every 5 seconds.
Current speed displayed digitally.
Updated engine oil temperature
digital display
If the stored speed is exceeded (be-
tween 30 - 250 km/h, or 18 -
155 mph), an audible warning is giv-
en together with a visual warning.
»
31