Seat Alhambra Owner's Manual page 146

Interior rear vision mirror
Manual anti-dazzle function for rear
Fig. 150
vision mirror
Automatic anti-dazzle function for
Fig. 151
rear vision mirror
The driver should always adjust the rear vi-
sion mirror to permit adequate visibility
through the rear window.
144
Operation
Manual anti-dazzle function for interior
rear vision mirror
Basic position: point the lever at the bottom
●
of the mirror forwards.
Pull the lever to the back to select the anti-
●
›››
dazzle function Fig. 150.
Automatic anti-dazzle function for interior
mirror
Key to Fig. 151:
Control lamp
1
Control
2
Light incidence sensor
3
This function can be activated and deactiva-
ted by pressing the rear-view mirror switch
›››
Fig. 151 . When it is activated, the warn-
2
ing lamp lights up .
1
When the ignition is on, the sensor
matically moves the rear vision mirror to the
anti-dazzle position depending upon the inci-
dence of the light from behind.
The automatic anti-dazzle function is deacti-
vated when reverse gear is engaged or the
interior or reading lights are on.
Note
If the light is obstructed or prevented from
reaching the sensor, e.g. by the sun blinds,
the rear vision mirror with automatic anti-
dazzle function will not operate correctly.
Exterior mirrors
On the driver door: control for exter-
Fig. 152
nal rear-view mirrors.
Read the additional information carefully
›››

page 17
Turn the knob to the required position:

Electric folding exterior mirrors
auto-
3
Switch on the exterior mirror heating They

only heat up if the ambient temperature is
less than +20°C (+68°F).
Adjust the left-hand exterior mirror by turn-

ing the knob forward, backward, to the right
or to the left.
Adjust the right-hand exterior mirror by turn-

ing the knob forward, backward, to the right
or to the left.
Zero position. Exterior mirror unfolded, exte-

rior mirror heating off, adjustment of exterior
mirror not possible.
›››
.