Seat Alhambra Owner's Manual page 34

Changing between display modes
In vehicles without multi-function wheel:
●
push the lever.
In vehicles with multi-function wheel: press
●
the key or .
 
Storing a speed for the speed warning
Select the display Speed warning at
●
.
--- km/h
Press to store the current speed and
● OK
switch off the warning.
In addition, set the required speed by press-
●
ing the rocker switch on the windscreen wiper
lever or using the or buttons on the multi-
 
function steering wheel during the subse-
quent 5 seconds. Next, press
wait a few seconds. The speed is stored and
the warning activated.
To switch off, press
●
OK
deleted.
Manually erasing memory 1 or 2
Select the memory that you wish to erase.
●
Hold down for approximately 2 sec-
● OK
onds.
Personalising the displays
It is possible to select which of the displays in
the multifunction display you wish to see on
the instrument panel in the Settings menu.
32
The units of measurement can also be modi-
›››
fied
Settings
Assistance
systems
Multifunc-
tion dis-
play data
Compass
again or
OK
Conven-
ience
. The stored speed is
Lights &
visibility
Time
The essentials
page 32.
menu
Selection of the different settings of
driver assistance systems: Sign Assist,
Lane Assist, Front Assist and ACC
›››
page 259.
Configuration of the multifunction dis-
play data that you wish to see on the
›››
instrument panel display page
Changing the magnetic region and
calibration of the compass. To cali-
brate the compass, please follow the
instructions given on the instrument
panel display.
Changing vehicle convenience func-
›››
tions page 33.
Configuration of vehicle lighting
›››
page 33.
Changing the hours and minutes of
the instrument panel clock and the
navigation system. The time can be
set here and the choice can be made
between the 24-hour and 12-hour dis-
play. The S in the upper part of the
display indicates that the clock is set
to summer time.
Changing the visual and audible
speed warnings. This function should
Winter
only be used when the vehicle is fitted
tyres
with winter tyres, which are not de-
signed for travel at high speeds.
Changing the language of the display
Language
texts and the navigation system.
Changing the units of measurement
Units for the temperature, consumption and
distance.
Second Switching second speed display on
speed and off.
31.
Check the service notifications or re-
Service
set the service intervals to zero.
Some functions of the Configura-
Factory
menu will be reset to the factory
tion
settings
value.
Back The main menu is displayed again.