Parking using the park assist sys-
tem
Detailed view of the centre console:
Fig. 251
button to switch the park assist system on man-
ually
Driver assistance systems
Gap detected: in line or in battery.
Fig. 252
Preparing to park
The Traction control system ASR must be
●
›››
turned on
page
238.
In parallel parking: press the
●
›››
Fig. 251
button as many times as necessa-
ry to select the desired parking mode. When
the function is enabled, the lamp button will
light up.
In head-in parking: press the
●
›››
Fig. 251
button as many times as necessa-
ry to select the desired parking mode. When
the function is enabled, the lamp button will
light up.
If necessary, press the
●
to change parking mode.
Apply the turn signal for the side on which a
●
gap is to be detected for parking. The instru-
ment panel displays the side corresponding
to the road.
Parking
When parking parallel to the road: drive
●
next to the gap at a speed of no more than
40 km/h (25 mph) and at a distance of be-
tween 0.5 m and 2 m.
When parking perpendicular to the road:
●
drive next to the gap at a speed of no more
than 20 km/h (12 mph) and at a distance of
between 0.5 m and 2 m.
The best parking results will be achieved if
●
you position the vehicle as parallel as possi-
ble to the line of parked cars or the kerb.
When a suitable parking place is displayed
●
on the instrument panel, stop and select re-
verse gear.
Follow the instructions given on the instru-
●
ment panel display
Then, release the steering wheel when the
●
warning signal sounds
button once more
»
›››
: The system
267