Atm Modules - Cisco Catalyst 6500 Series Installation Manual

ATM Modules

Table 1-6 Ethernet and Gigabit Ethernet Module LEDs (continued)
LED Color/State
LINK Green
Orange
Flashing
orange
Off
PHONE Green
Off
1. This is a good time to verify that all LINK LEDs are functioning.
ATM Modules
Note
Catalyst 6500 Series Switch Module Installation Guide
1-48
Description
The port is active (the link is connected and operational).
The module or port is disabled through the CLI command or the
module is initializing
The port is faulty and has been disabled.
The port is not active or the link is not connected.
The voice daughter card is installed.
The voice daughter card is not detected or is not installed.
This section describes these ATM modules:
1-Port OC-12 ATM Module (WS-X6101-OC12-MMF), page 1-49
•
1-Port OC-12 ATM Module (WS-X6101-OC12-SMF), page 1-50
•
ATM Module LEDs, page 1-51
•
These modules are Class 1 laser products. Refer to the Regulatory Compliance
and Safety Information for the Catalyst 6500 Series Switches for information on
working with lasers.
Chapter 1
1
.
Product Overview
78-15725-02