48-Port 10/100/1000Base-T Ethernet Switching Module (Ws-X6148-Ge-Tx); 48-Port 10/100/1000Base-T Ethernet Switching Module (Ws-X6148V-Ge-Tx) - Cisco Catalyst 6500 Series Installation Manual

Chapter 1 Product Overview
48-Port 10/100/1000BASE-T Ethernet Switching Module
(WS-X6148-GE-TX)
Figure 1-5

48-Port 10/100/1000BASE-T Ethernet Switching Module (WS-X6148-GE-TX)

WS-X6148V-GE-TX
1 11
2 12
STATUS
48-Port 10/100/1000BASE-T Ethernet Switching Module
(WS-X6148V-GE-TX)
78-15725-02
The 48-port 10/100/1000BASE-T switching module (WS-X6148-GE-TX)
provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports.
(See Figure 1-5.) The module has 48 RJ-45 connectors for use with either
Category 3, Category 5, Category 5e, or Category 6 UTP cable. This module can
be upgraded with an inline-power daughter card to support IP phones.
13 23
14 24
48 PORT 10/100/1000
BASE-T GE
The front panel LEDs are described in
The 48-port 10/100/1000BASE-T switching module (WS-X6148V-GE-TX)
provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports.
(See Figure 1-6.) The module has 48 RJ-45 connectors for use with either
Category 3, Category 5, Category 5e, or Category 6 UTP cable. The "V" in the
product number indicates that the inline-power daughter card is installed on the
module. With the voice daughter card installed, the module provides these IP
phone features on each port:
Inline power—Provides 48 VDC over standard Category 5, Category 5e, or
•
Category 6 UTP cable up to 328 feet (100 meters) from the switch to the IP
phone. With inline power, pairs 2 and 3 (pins 1, 2, 3, and 6) of the four pairs
in the cable are used to transmit power (6.3 W) from the switch. This method
of supplying power is sometimes called phantom power because the power
signals travel over the same two pairs used to transmit Ethernet signals. The
power signals are completely transparent to the Ethernet signals and do not
interfere with their operation.
10/100 and 10/100/1000 Ethernet Switching Modules
25 35 37
26 36 38
SWITCHING MODULE
Table 1-6 on page
Catalyst 6500 Series Switch Module Installation Guide
47
48
PHONE
1-47.
1-21