Cisco Catalyst 6500 Series Installation Manual page 141

Chapter 3 Installing the Module
Table 3-1
Supervisor Engine
Supervisor Engine 1A
Supervisor Engine 2
Supervisor Engine 720
You should install switching-module filler plates (Cisco part number
800-00292-01) in any empty slots to maintain consistent airflow through the
switch chassis.
To prevent ESD damage, handle modules by the carrier edges only.
Caution
During this procedure, wear grounding wrist straps to avoid ESD damage to the
Caution
module.
Invisible laser radiation may be emitted from disconnected fibers or
Warning
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
78-15725-02
Supervisor Engine Slot Assignments
Slot Assignments
Slots 1 and 2 (3-slot chassis)
•
Slots 1 and 2 (6-slot chassis)
•
Slots 1 and 2 (9-slot chassis)
•
Slots 1 and 2 (3-slot chassis)
•
Slots 1 and 2 (6-slot chassis)
•
• Slots 1 and 2 (9-slot chassis
Slots 1 and 2 (13-slot chassis)
•
Slots 1 and 2 (3-slot chassis)
•
Slots 5 and 6 (6-slot chassis)
•
Slots 5 and 6 (9-slot chassis)
•
Slots 7 and 8 (13-slot chassis)
•
Catalyst 6500 Series Switch Module Installation Guide
Installing a Supervisor Engine or a Switching Module
3-3