Supervisor Engine Console Port Signals And Pinouts - Cisco Catalyst 6500 Series Installation Manual

Supervisor Engine Console Port Signals and Pinouts

Supervisor Engine Console Port Signals and Pinouts
Catalyst 6500 Series Switch Module Installation Guide
B-8
Figure B-4 Twisted-Pair Crossover 1000BASE-T Cable Schematic
Switch
1 TPO+
2 TPO-
3 TP1+
6 TP1-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
The Catalyst 6500 series switch comes with an accessory kit that contains the
cable and adapters you need to connect a console (an ASCII terminal or PC
running terminal emulation software) or modem to the console port. The
accessory kit includes these items:
RJ-45-to-RJ-45 rollover cable
•
RJ-45-to-DB-9 female DTE adapter (labeled "Terminal")
•
RJ-45-to-DB-25 female DTE adapter (labeled "Terminal")
•
RJ-45-to-DB-25 male DCE adapter (labeled "Modem")
•
This is the same cable and adapters that ship with the Cisco 2500 series routers
and other Cisco products.
Appendix B
Switch
1 TP0+
2 TP0-
3 TP1+
6 TP1-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
Cable and Connector Specifications
78-15725-02